Guide: How to choose the right angle grinder for your project
Guide: How to choose the right angle grinder for your project
An angle grinder is a versatile tool that can be used for everything from cutting metal and stone to grinding and polishing surfaces. Whether you work with wood, metal or masonry, the right angle grinder can make the job both faster and more precise. But with many models and variants on the market, it can be difficult to choose the one that best suits your needs.
In this guide, you’ll get an overview of what to consider when choosing an angle grinder, as well as an introduction to different types and brands, so you can find the tool that fits your project.
The article presents a wide selection of angle grinders in various sizes and price ranges. The purpose is to provide an overview of features, characteristics and areas of use, so that you can more easily assess which type best suits your project. The information about the products is based on publicly available descriptions from manufacturers and retailers and has been compiled to provide an informative and neutral overview.
Factors to consider when buying an angle grinder
When choosing an angle grinder, there are several factors to consider – from motor power and disc diameter to ergonomics and safety. Here we go through the most important considerations.
1. Motor power and speed
Motor power is usually measured in watts (for corded models) or volts (for battery-powered models). A more powerful motor provides better performance for demanding tasks such as cutting metal or concrete. At the same time, speed is important – higher speed gives faster material removal but also requires more control.
2. Disc diameter
The most common sizes are 115 mm, 125 mm and 230 mm. Smaller discs are ideal for precision work and lighter tasks, while larger discs are suitable for deeper cuts and heavier materials. Consider what types of tasks you most often perform before choosing a size.
3. Power source: corded or battery
Corded angle grinders provide constant power and are suitable for longer work sessions. Battery-powered models offer greater freedom of movement and are practical in places without electricity. The latest battery models have high capacity and can often match corded models in performance.
4. Ergonomics and weight
An angle grinder should feel comfortable in the hand, especially if you work for longer periods. Look for models with an adjustable handle, low weight and vibration damping. This reduces fatigue and increases precision.
5. Safety features
Safety is crucial when using an angle grinder. Features such as restart protection, soft start and quick disc stop can prevent accidents. A stable guard and correct use of protective equipment are also important for safety.
6. Price and area of use
The price depends on power, quality and features. For hobby use, a compact model may be sufficient, while professionals should choose a robust machine with high performance and long service life.
Products in focus
The Metabo Angle Grinder Mini 18 LTX BL Solo is a cordless angle grinder designed for quick and precise tasks. It is equipped with a spindle lock, making it easy to change discs, and a threaded spindle with M5 thread, ensuring stable mounting of accessories.
The brushless motor provides high efficiency and fast progress while reducing maintenance needs. The overload protection protects the motor from overheating, while the restart protection prevents accidental start-up after battery replacement.
The machine comes with practical accessories, including clamps for the protective cover, several cutting discs and a hex key, so the user can quickly get started with the work.
- Brushless motor: Provides high efficiency and longer service life.
- Spindle lock: Makes disc changes quick and easy.
- Overload protection: Protects the motor from overheating.
- Restart protection: Prevents accidental start-up after battery replacement.
- Compact design: Ideal for work in confined spaces.
Pros and cons
- Lightweight and compact design
- Brushless motor with high efficiency
- Several safety features for safe use
- Easy disc change via spindle lock
- Comes with practical accessories
- Delivered without battery and charger (Solo version)
- Limited operating time depending on battery capacity
Pros and cons
Pros
- Lightweight and compact design
- Brushless motor with high efficiency
- Several safety features for safe use
- Easy disc change via spindle lock
- Comes with practical accessories
Cons
- Delivered without battery and charger (Solo version)
- Limited operating time depending on battery capacity
Pros
- Lightweight and compact design
- Brushless motor with high efficiency
- Several safety features for safe use
- Easy disc change via spindle lock
- Comes with practical accessories
Cons
- Delivered without battery and charger (Solo version)
- Limited operating time depending on battery capacity
Specifications
- Manufacturer: Metabo
- Model: Mini 18 LTX BL Solo
- Item number (SKU): 600349850
- Spindle thread: M5
- Motor: Brushless
- Safety features: Overload protection and restart protection
- Power source: Battery (18V, not included)
- Included accessories: Clamps for protective cover, 2 cutting discs Flexiarapid Super Inox, 2 cutting discs Flexiarapid Super Universal, cutting and grinding disc Combinator Inox, hex key
The DeWalt Angle Grinder 230mm 54V XR Solo is part of DeWalt's XR FLEXVOLT series and delivers cordless power equivalent to a traditional mains-powered machine. The large 230 mm disc diameter makes it suitable for demanding tasks such as cutting and grinding metal, concrete and other hard materials.
The machine is equipped with a brushless motor, which increases runtime and reduces maintenance. The electronic brake quickly stops the disc when the trigger is released, and the electronic clutch reduces the risk of kickback if the disc jams or stops.
The soft start function provides a controlled start, while the rubber coating on the handle ensures comfort and stability during use. The model supports wireless tool control, which can connect the angle grinder to compatible extraction systems for better dust control.
This N-version is supplied without battery and charger, but includes a hex key as well as both cutting and grinding guards in a practical case.
- 54V XR FLEXVOLT system: Delivers high power without the need for a cord.
- Brushless motor: Extended runtime and increased durability.
- Electronic brake: Quickly stops the disc for increased safety.
- Electronic clutch: Reduces the risk of kickback in case of jamming.
- Soft start: Provides smooth and controlled start-up.
- Wireless tool control: Enables automatic connection to extraction systems.
- Ergonomic design: Rubber-coated handle for better comfort and control.
Pros and cons
- Powerful 54V motor with high performance
- Safety features such as brake and clutch
- Compatible with wireless tool control
- Ergonomic and robust construction
- Cordless flexibility
- Supplied without battery and charger (solo version)
- Relatively heavy compared to smaller models
- Requires compatible FLEXVOLT batteries for full performance
Pros and cons
Pros
- Powerful 54V motor with high performance
- Safety features such as brake and clutch
- Compatible with wireless tool control
- Ergonomic and robust construction
- Cordless flexibility
Cons
- Supplied without battery and charger (solo version)
- Relatively heavy compared to smaller models
- Requires compatible FLEXVOLT batteries for full performance
Pros
- Powerful 54V motor with high performance
- Safety features such as brake and clutch
- Compatible with wireless tool control
- Ergonomic and robust construction
- Cordless flexibility
Cons
- Supplied without battery and charger (solo version)
- Relatively heavy compared to smaller models
- Requires compatible FLEXVOLT batteries for full performance
Specifications
- Manufacturer: DeWalt
- Model: DW-DCG460N-XJ
- Series: XR FLEXVOLT
- Voltage: 54V
- Disc diameter: 230 mm
- Motor: Brushless
- Features: Electronic brake, electronic clutch, soft start, wireless tool control
- Scope of delivery: Hex key, cutting and grinding guards (without battery and charger)
- EAN/SKU: DW-DCG460N-XJ
The Proxxon Long Neck Angle Grinder LHW is designed for precision work where control and accuracy are required. It is ideal for cutting, grinding, polishing and shaping materials such as steel, soft metals, glass, ceramics, wood and plastic.
The machine is equipped with a quiet, balanced special motor that ensures smooth operation and long service life. The gearbox housing is made of cast aluminium, while the motor housing is made of glass fibre reinforced polyamide, providing a good balance between strength and low weight.
The delivery scope includes a corundum grinding disc (K60), a flap disc (K100) and a reinforced cutting disc, allowing the user to start with various types of tasks immediately.
Weighing only 550 grams and measuring 270 mm in length, the tool is easy to handle even during longer work sessions. The high rotational speed of 13,000 revolutions per minute makes it effective for both coarse and fine grinding.
- Versatile use: Suitable for metal, glass, ceramics, wood and plastic.
- Lightweight and compact: Only 550 g and 270 mm long for easy handling.
- Robust construction: Gear housing in cast aluminium and casing in glass fibre reinforced polyamide.
- High speed: 13,000 revolutions per minute for efficient processing.
- Complete set: Supplied with three different discs for cutting and grinding.
Pros and cons
- Low weight and ergonomic design
- Suitable for precision work in many materials
- Long service life thanks to special motor and solid materials
- Supplied with several types of discs
- The disc diameter of 50 mm limits use to smaller workpieces
- Requires power connection (not battery-powered)
Pros and cons
Pros
- Low weight and ergonomic design
- Suitable for precision work in many materials
- Long service life thanks to special motor and solid materials
- Supplied with several types of discs
Cons
- The disc diameter of 50 mm limits use to smaller workpieces
- Requires power connection (not battery-powered)
Pros
- Low weight and ergonomic design
- Suitable for precision work in many materials
- Long service life thanks to special motor and solid materials
- Supplied with several types of discs
Cons
- The disc diameter of 50 mm limits use to smaller workpieces
- Requires power connection (not battery-powered)
Specifications
- Voltage: 220–240 V
- Power: 100 W
- Speed: 13,000/min
- Disc diameter: 50 mm
- Bore diameter: 10 mm
- Length: 270 mm
- Weight: 550 g
- Run-down time: under 1 second
- Insulation class: Class 2 (double insulated)
- Material: Gear housing in cast aluminium, casing in glass fibre reinforced polyamide
- Included accessories: Grinding disc K60, flap disc K100, cutting disc (reinforced)
- SKU: ROL-28547
The Milwaukee M18 BLSAG125XPD-0 is a 125 mm cordless angle grinder that uses a brushless motor to achieve high efficiency and long service life. It delivers performance comparable to an 800 W corded angle grinder, making it suitable for demanding cutting and grinding tasks.
The machine has a maximum speed of 11,000 revolutions per minute and is optimised for precise and fast cuts. It is equipped with a large dead man's switch, which increases safety during use, as well as a safety clutch that protects against kickback.
The integrated FIXTEC system allows for tool-free disc changes, and the 125 mm guard can be quickly adjusted without a key. The angle grinder has a slim and ergonomic design, making it easy to handle even during extended use.
The model is part of the Milwaukee M18 series and can be used with all M18 batteries. It is supplied without a battery and charger, making it ideal as a complement to existing Milwaukee tool kits.
- Brushless motor: Increases efficiency and extends the tool's lifespan.
- High performance: Same power as an 800 W corded angle grinder.
- Safety clutch: Reduces the risk of kickback during use.
- FIXTEC system: Enables tool-free disc changes.
- Flexible battery system: Compatible with all Milwaukee M18 batteries.
Pros and cons
- Brushless motor with high efficiency
- Lightweight and compact design
- Tool-free disc change via FIXTEC
- Compatible with the entire M18 battery series
- Safety features such as dead man's switch and anti-kickback
- Supplied without battery and charger
- Maximum cutting depth of 33 mm may be limiting for some tasks
Pros and cons
Pros
- Brushless motor with high efficiency
- Lightweight and compact design
- Tool-free disc change via FIXTEC
- Compatible with the entire M18 battery series
- Safety features such as dead man's switch and anti-kickback
Cons
- Supplied without battery and charger
- Maximum cutting depth of 33 mm may be limiting for some tasks
Pros
- Brushless motor with high efficiency
- Lightweight and compact design
- Tool-free disc change via FIXTEC
- Compatible with the entire M18 battery series
- Safety features such as dead man's switch and anti-kickback
Cons
- Supplied without battery and charger
- Maximum cutting depth of 33 mm may be limiting for some tasks
Specifications
- Model: M18 BLSAG125XPD-0
- Item number (SKU): 4933492645
- Disc diameter: 125 mm
- Max. cutting depth: 33 mm
- No-load speed: 11,000 rpm
- Switch: Large switch (dead man's switch)
- Anti-kickback protection: Yes
- No-voltage start: Yes
- Motor brake: No
- Weight incl. battery (EPTA): 2.4 kg (M18 B4)
- Battery system: Milwaukee M18 (compatible with all M18 batteries)
The Bosch GWS 18V-10 PC SOLO is a compact and powerful cordless angle grinder that delivers performance equivalent to a 1,000 W corded model. It is equipped with a brushless EC motor, ensuring high efficiency and longer service life.
The machine is part of Bosch's 18 V system and is compatible with ProCORE18V batteries, providing flexibility between tools in the same series. It comes in a robust L-BOXX storage case, but without battery and charger.
The angle grinder is designed to provide better control and safety during use and is suitable for both cutting and grinding tasks with a disc diameter of up to 125 mm. The combination of low weight and ergonomic design makes it suitable for long-term work.
- Brushless EC motor: Increases efficiency and reduces maintenance.
- Performance like a 1,000 W corded model: Delivers high power in a battery-powered format.
- Compatible with ProCORE18V batteries: Provides flexibility within Bosch's 18 V system.
- Disc diameter 125 mm: Suitable for common cutting and grinding tasks.
- Delivered in L-BOXX: Practical storage and transport.
Pros and cons
- Powerful performance relative to its size
- Brushless motor for longer service life
- Compatible with existing Bosch 18 V batteries
- Delivered in robust L-BOXX
- Battery and charger not included
- May require additional investment in ProCORE18V batteries for optimal performance
Pros and cons
Pros
- Powerful performance relative to its size
- Brushless motor for longer service life
- Compatible with existing Bosch 18 V batteries
- Delivered in robust L-BOXX
Cons
- Battery and charger not included
- May require additional investment in ProCORE18V batteries for optimal performance
Pros
- Powerful performance relative to its size
- Brushless motor for longer service life
- Compatible with existing Bosch 18 V batteries
- Delivered in robust L-BOXX
Cons
- Battery and charger not included
- May require additional investment in ProCORE18V batteries for optimal performance
Specifications
- Manufacturer: Bosch Professional
- Model: GWS 18V-10 PC SOLO
- Battery voltage: 18 V
- No-load speed: 9,000 rpm
- Disc/cutting disc diameter: 125 mm
- Motor type: Brushless EC motor
- Scope of delivery: L-BOXX (without battery and charger)
- Article number (SKU): 06019G3E0B
The Metabo WEV 15-125 Quick is a 125 mm angle grinder designed to deliver high power and precision under demanding conditions. The 1550 W motor provides high working speed, while the electronic speed control allows adjustment of the rotation speed for different materials and tasks.
The machine is equipped with Metabo's Quick system, which allows discs to be changed without tools. The twist-proof guard can be adjusted quickly and safely, and the vibration-damped MVT handle contributes to better comfort during prolonged use.
Safety is prioritised with features such as overload protection, electronic soft start, restart protection and the Metabo S-automatic safety clutch, which reduces the risk of kickback. The robust construction and self-disconnecting motor brushes extend the machine's service life.
With a weight of 2.5 kg and a 4-metre cable, the WEV 15-125 Quick provides a good balance between power, control and freedom of movement, making it suitable for both precision work and heavier grinding tasks.
- Powerful motor: 1550 W high-performance motor for demanding tasks.
- Speed control: Adjustable rotation speed from 2,800 to 11,000 rpm.
- Quick system: Tool-free disc change for fast and efficient operation.
- Vibration damping: MVT handle reduces strain during prolonged use.
- Safety features: Overload protection, soft start and restart protection.
- Long service life: Robust construction and self-disconnecting motor brushes.
Pros and cons
- Powerful motor with high power reserve
- Fast and tool-free disc change
- Adjustable speed for different materials
- Good vibration damping and ergonomics
- Several safety features for safe operation
- The weight of 2.5 kg can feel heavy during prolonged use
- The cable may limit freedom of movement compared to cordless models
Pros and cons
Pros
- Powerful motor with high power reserve
- Fast and tool-free disc change
- Adjustable speed for different materials
- Good vibration damping and ergonomics
- Several safety features for safe operation
Cons
- The weight of 2.5 kg can feel heavy during prolonged use
- The cable may limit freedom of movement compared to cordless models
Pros
- Powerful motor with high power reserve
- Fast and tool-free disc change
- Adjustable speed for different materials
- Good vibration damping and ergonomics
- Several safety features for safe operation
Cons
- The weight of 2.5 kg can feel heavy during prolonged use
- The cable may limit freedom of movement compared to cordless models
Specifications
- Manufacturer: Metabo
- Model: WEV 15-125 Quick
- Item number (SKU): 600468000
- Disc diameter: 125 mm
- Rated power: 1550 W
- Output power: 940 W
- No-load speed: 2,800–11,000 rpm
- Speed at rated load: 11,000 rpm
- Torque: 3.5 Nm
- Spindle thread: M14
- Weight without power cable: 2.5 kg
- Cable length: 4 m
- Scope of delivery: Protective guard, support flange, Quick clamping nut, MVT handle
The Milwaukee Angle Grinder AG 800-125 EK is a compact and powerful 125 mm angle grinder powered by an 800 W motor. It is designed to deliver efficient cutting and grinding in metal and other hard materials while maintaining low weight and ergonomic design.
The machine has a slim grip and a total length of only 194 mm, making it easy to handle even in tight work areas. A flat gear housing provides better visibility of the workpiece and allows for optimal cutting depth.
Safety is prioritised with a no-voltage release switch that prevents automatic restart after a power outage, as well as soft start for better control. The guard can be adjusted and removed without tools, making it quick to adapt the machine to different tasks.
The angle grinder comes with a 4-metre cable, guard, side handle, flange, flange nut and key, so it is ready to use straight out of the box.
- Powerful motor: 800 W motor ensures efficient cutting and grinding.
- Compact design: Only 194 mm long and 2.0 kg for easy handling.
- Safety features: No-voltage release switch and soft start for increased control.
- Easy adjustment: The guard can be adjusted without tools.
- Flat gear housing: Provides better visibility and optimal cutting depth in tight areas.
Pros and cons
- Low weight and compact construction
- Efficient 800 W motor
- Ergonomic grip for comfortable use
- Safety features such as no-voltage release switch and soft start
- Easy adjustment of guard without tools
- Comes without case or bag
- No anti-vibration system or motor brake
Pros and cons
Pros
- Low weight and compact construction
- Efficient 800 W motor
- Ergonomic grip for comfortable use
- Safety features such as no-voltage release switch and soft start
- Easy adjustment of guard without tools
Cons
- Comes without case or bag
- No anti-vibration system or motor brake
Pros
- Low weight and compact construction
- Efficient 800 W motor
- Ergonomic grip for comfortable use
- Safety features such as no-voltage release switch and soft start
- Easy adjustment of guard without tools
Cons
- Comes without case or bag
- No anti-vibration system or motor brake
Specifications
- Model: AG 800-125 EK
- Manufacturer: Milwaukee
- Item number (SKU): 4933451213
- Power: 800 W
- Disc diameter: 125 mm
- Max. cutting depth: 33 mm
- No-load speed: 11,500 rpm
- Spindle thread: M14
- Weight: 2.0 kg
- Length: 194 mm
- Switch: Lockable slide switch
- Anti-kickback protection: No
- AVS (Anti-vibration system): No
- Motor brake: No
- No-voltage release switch: Yes
- Supplied in: Without case or bag
- Standard equipment: Guard, side handle, key, flange nut
- Cable: 4 metres
The Metabo Angle Grinder W 850-125 is designed as a universal machine for grinding and cutting metal, stone, and other hard materials. It is built with a focus on durability and reliability, making it suitable for both workshops and construction sites.
The machine is equipped with a powerful motor with good overload capacity, allowing it to handle demanding tasks without losing performance. The twist-proof guard contributes to increased safety during use, and the restart protection prevents accidental start-up after a power outage.
With a disc diameter of 125 mm and an output of 850 watts, the model offers a good balance between power and manageability. The compact size makes it easy to control, even during long work sessions or in confined work areas.
- Power of 850 W: Provides sufficient power for most grinding and cutting tasks.
- 125 mm disc diameter: Fits standard grinding and cutting discs.
- Twist-proof guard: Increases safety during use.
- Restart protection: Prevents accidental start-up after a power outage.
- Compact design: Makes the machine easy to handle and transport.
Pros and cons
- Robust construction with good overload capacity
- Safety features such as restart protection and protective guard
- Compact and easy to handle
- Suitable for many types of tasks
- Delivered without extra accessories unless otherwise stated
- May require breaks during prolonged use to avoid overheating
Pros and cons
Pros
- Robust construction with good overload capacity
- Safety features such as restart protection and protective guard
- Compact and easy to handle
- Suitable for many types of tasks
Cons
- Delivered without extra accessories unless otherwise stated
- May require breaks during prolonged use to avoid overheating
Pros
- Robust construction with good overload capacity
- Safety features such as restart protection and protective guard
- Compact and easy to handle
- Suitable for many types of tasks
Cons
- Delivered without extra accessories unless otherwise stated
- May require breaks during prolonged use to avoid overheating
Specifications
- Manufacturer: Metabo
- Model: W 850-125
- Power: 850 W
- Disc diameter: 125 mm
- Safety features: Restart protection, twist-proof guard
- Application area: Grinding and cutting of metal, stone, etc.
- Item number: 603608000
Product descriptions
The Metabo Angle Grinder Mini 18 LTX BL Solo is a cordless angle grinder designed for quick and precise tasks. It is equipped with a spindle lock, making it easy to change discs, and a threaded spindle with M5 thread, ensuring stable mounting of accessories.
The brushless motor provides high efficiency and fast progress while reducing maintenance needs. The overload protection protects the motor from overheating, while the restart protection prevents accidental start-up after battery replacement.
The machine comes with practical accessories, including clamps for the protective cover, several cutting discs and a hex key, so the user can quickly get started with the work.
- Brushless motor: Provides high efficiency and longer service life.
- Spindle lock: Makes disc changes quick and easy.
- Overload protection: Protects the motor from overheating.
- Restart protection: Prevents accidental start-up after battery replacement.
- Compact design: Ideal for work in confined spaces.
Pros and cons
- Lightweight and compact design
- Brushless motor with high efficiency
- Several safety features for safe use
- Easy disc change via spindle lock
- Comes with practical accessories
- Delivered without battery and charger (Solo version)
- Limited operating time depending on battery capacity
Pros and cons
Pros
- Lightweight and compact design
- Brushless motor with high efficiency
- Several safety features for safe use
- Easy disc change via spindle lock
- Comes with practical accessories
Cons
- Delivered without battery and charger (Solo version)
- Limited operating time depending on battery capacity
Pros
- Lightweight and compact design
- Brushless motor with high efficiency
- Several safety features for safe use
- Easy disc change via spindle lock
- Comes with practical accessories
Cons
- Delivered without battery and charger (Solo version)
- Limited operating time depending on battery capacity
Specifications
- Manufacturer: Metabo
- Model: Mini 18 LTX BL Solo
- Item number (SKU): 600349850
- Spindle thread: M5
- Motor: Brushless
- Safety features: Overload protection and restart protection
- Power source: Battery (18V, not included)
- Included accessories: Clamps for protective cover, 2 cutting discs Flexiarapid Super Inox, 2 cutting discs Flexiarapid Super Universal, cutting and grinding disc Combinator Inox, hex key
The DeWalt Angle Grinder 230mm 54V XR Solo is part of DeWalt's XR FLEXVOLT series and delivers cordless power equivalent to a traditional mains-powered machine. The large 230 mm disc diameter makes it suitable for demanding tasks such as cutting and grinding metal, concrete and other hard materials.
The machine is equipped with a brushless motor, which increases runtime and reduces maintenance. The electronic brake quickly stops the disc when the trigger is released, and the electronic clutch reduces the risk of kickback if the disc jams or stops.
The soft start function provides a controlled start, while the rubber coating on the handle ensures comfort and stability during use. The model supports wireless tool control, which can connect the angle grinder to compatible extraction systems for better dust control.
This N-version is supplied without battery and charger, but includes a hex key as well as both cutting and grinding guards in a practical case.
- 54V XR FLEXVOLT system: Delivers high power without the need for a cord.
- Brushless motor: Extended runtime and increased durability.
- Electronic brake: Quickly stops the disc for increased safety.
- Electronic clutch: Reduces the risk of kickback in case of jamming.
- Soft start: Provides smooth and controlled start-up.
- Wireless tool control: Enables automatic connection to extraction systems.
- Ergonomic design: Rubber-coated handle for better comfort and control.
Pros and cons
- Powerful 54V motor with high performance
- Safety features such as brake and clutch
- Compatible with wireless tool control
- Ergonomic and robust construction
- Cordless flexibility
- Supplied without battery and charger (solo version)
- Relatively heavy compared to smaller models
- Requires compatible FLEXVOLT batteries for full performance
Pros and cons
Pros
- Powerful 54V motor with high performance
- Safety features such as brake and clutch
- Compatible with wireless tool control
- Ergonomic and robust construction
- Cordless flexibility
Cons
- Supplied without battery and charger (solo version)
- Relatively heavy compared to smaller models
- Requires compatible FLEXVOLT batteries for full performance
Pros
- Powerful 54V motor with high performance
- Safety features such as brake and clutch
- Compatible with wireless tool control
- Ergonomic and robust construction
- Cordless flexibility
Cons
- Supplied without battery and charger (solo version)
- Relatively heavy compared to smaller models
- Requires compatible FLEXVOLT batteries for full performance
Specifications
- Manufacturer: DeWalt
- Model: DW-DCG460N-XJ
- Series: XR FLEXVOLT
- Voltage: 54V
- Disc diameter: 230 mm
- Motor: Brushless
- Features: Electronic brake, electronic clutch, soft start, wireless tool control
- Scope of delivery: Hex key, cutting and grinding guards (without battery and charger)
- EAN/SKU: DW-DCG460N-XJ
The Proxxon Long Neck Angle Grinder LHW is designed for precision work where control and accuracy are required. It is ideal for cutting, grinding, polishing and shaping materials such as steel, soft metals, glass, ceramics, wood and plastic.
The machine is equipped with a quiet, balanced special motor that ensures smooth operation and long service life. The gearbox housing is made of cast aluminium, while the motor housing is made of glass fibre reinforced polyamide, providing a good balance between strength and low weight.
The delivery scope includes a corundum grinding disc (K60), a flap disc (K100) and a reinforced cutting disc, allowing the user to start with various types of tasks immediately.
Weighing only 550 grams and measuring 270 mm in length, the tool is easy to handle even during longer work sessions. The high rotational speed of 13,000 revolutions per minute makes it effective for both coarse and fine grinding.
- Versatile use: Suitable for metal, glass, ceramics, wood and plastic.
- Lightweight and compact: Only 550 g and 270 mm long for easy handling.
- Robust construction: Gear housing in cast aluminium and casing in glass fibre reinforced polyamide.
- High speed: 13,000 revolutions per minute for efficient processing.
- Complete set: Supplied with three different discs for cutting and grinding.
Pros and cons
- Low weight and ergonomic design
- Suitable for precision work in many materials
- Long service life thanks to special motor and solid materials
- Supplied with several types of discs
- The disc diameter of 50 mm limits use to smaller workpieces
- Requires power connection (not battery-powered)
Pros and cons
Pros
- Low weight and ergonomic design
- Suitable for precision work in many materials
- Long service life thanks to special motor and solid materials
- Supplied with several types of discs
Cons
- The disc diameter of 50 mm limits use to smaller workpieces
- Requires power connection (not battery-powered)
Pros
- Low weight and ergonomic design
- Suitable for precision work in many materials
- Long service life thanks to special motor and solid materials
- Supplied with several types of discs
Cons
- The disc diameter of 50 mm limits use to smaller workpieces
- Requires power connection (not battery-powered)
Specifications
- Voltage: 220–240 V
- Power: 100 W
- Speed: 13,000/min
- Disc diameter: 50 mm
- Bore diameter: 10 mm
- Length: 270 mm
- Weight: 550 g
- Run-down time: under 1 second
- Insulation class: Class 2 (double insulated)
- Material: Gear housing in cast aluminium, casing in glass fibre reinforced polyamide
- Included accessories: Grinding disc K60, flap disc K100, cutting disc (reinforced)
- SKU: ROL-28547
The Milwaukee M18 BLSAG125XPD-0 is a 125 mm cordless angle grinder that uses a brushless motor to achieve high efficiency and long service life. It delivers performance comparable to an 800 W corded angle grinder, making it suitable for demanding cutting and grinding tasks.
The machine has a maximum speed of 11,000 revolutions per minute and is optimised for precise and fast cuts. It is equipped with a large dead man's switch, which increases safety during use, as well as a safety clutch that protects against kickback.
The integrated FIXTEC system allows for tool-free disc changes, and the 125 mm guard can be quickly adjusted without a key. The angle grinder has a slim and ergonomic design, making it easy to handle even during extended use.
The model is part of the Milwaukee M18 series and can be used with all M18 batteries. It is supplied without a battery and charger, making it ideal as a complement to existing Milwaukee tool kits.
- Brushless motor: Increases efficiency and extends the tool's lifespan.
- High performance: Same power as an 800 W corded angle grinder.
- Safety clutch: Reduces the risk of kickback during use.
- FIXTEC system: Enables tool-free disc changes.
- Flexible battery system: Compatible with all Milwaukee M18 batteries.
Pros and cons
- Brushless motor with high efficiency
- Lightweight and compact design
- Tool-free disc change via FIXTEC
- Compatible with the entire M18 battery series
- Safety features such as dead man's switch and anti-kickback
- Supplied without battery and charger
- Maximum cutting depth of 33 mm may be limiting for some tasks
Pros and cons
Pros
- Brushless motor with high efficiency
- Lightweight and compact design
- Tool-free disc change via FIXTEC
- Compatible with the entire M18 battery series
- Safety features such as dead man's switch and anti-kickback
Cons
- Supplied without battery and charger
- Maximum cutting depth of 33 mm may be limiting for some tasks
Pros
- Brushless motor with high efficiency
- Lightweight and compact design
- Tool-free disc change via FIXTEC
- Compatible with the entire M18 battery series
- Safety features such as dead man's switch and anti-kickback
Cons
- Supplied without battery and charger
- Maximum cutting depth of 33 mm may be limiting for some tasks
Specifications
- Model: M18 BLSAG125XPD-0
- Item number (SKU): 4933492645
- Disc diameter: 125 mm
- Max. cutting depth: 33 mm
- No-load speed: 11,000 rpm
- Switch: Large switch (dead man's switch)
- Anti-kickback protection: Yes
- No-voltage start: Yes
- Motor brake: No
- Weight incl. battery (EPTA): 2.4 kg (M18 B4)
- Battery system: Milwaukee M18 (compatible with all M18 batteries)
The Bosch GWS 18V-10 PC SOLO is a compact and powerful cordless angle grinder that delivers performance equivalent to a 1,000 W corded model. It is equipped with a brushless EC motor, ensuring high efficiency and longer service life.
The machine is part of Bosch's 18 V system and is compatible with ProCORE18V batteries, providing flexibility between tools in the same series. It comes in a robust L-BOXX storage case, but without battery and charger.
The angle grinder is designed to provide better control and safety during use and is suitable for both cutting and grinding tasks with a disc diameter of up to 125 mm. The combination of low weight and ergonomic design makes it suitable for long-term work.
- Brushless EC motor: Increases efficiency and reduces maintenance.
- Performance like a 1,000 W corded model: Delivers high power in a battery-powered format.
- Compatible with ProCORE18V batteries: Provides flexibility within Bosch's 18 V system.
- Disc diameter 125 mm: Suitable for common cutting and grinding tasks.
- Delivered in L-BOXX: Practical storage and transport.
Pros and cons
- Powerful performance relative to its size
- Brushless motor for longer service life
- Compatible with existing Bosch 18 V batteries
- Delivered in robust L-BOXX
- Battery and charger not included
- May require additional investment in ProCORE18V batteries for optimal performance
Pros and cons
Pros
- Powerful performance relative to its size
- Brushless motor for longer service life
- Compatible with existing Bosch 18 V batteries
- Delivered in robust L-BOXX
Cons
- Battery and charger not included
- May require additional investment in ProCORE18V batteries for optimal performance
Pros
- Powerful performance relative to its size
- Brushless motor for longer service life
- Compatible with existing Bosch 18 V batteries
- Delivered in robust L-BOXX
Cons
- Battery and charger not included
- May require additional investment in ProCORE18V batteries for optimal performance
Specifications
- Manufacturer: Bosch Professional
- Model: GWS 18V-10 PC SOLO
- Battery voltage: 18 V
- No-load speed: 9,000 rpm
- Disc/cutting disc diameter: 125 mm
- Motor type: Brushless EC motor
- Scope of delivery: L-BOXX (without battery and charger)
- Article number (SKU): 06019G3E0B
The Metabo WEV 15-125 Quick is a 125 mm angle grinder designed to deliver high power and precision under demanding conditions. The 1550 W motor provides high working speed, while the electronic speed control allows adjustment of the rotation speed for different materials and tasks.
The machine is equipped with Metabo's Quick system, which allows discs to be changed without tools. The twist-proof guard can be adjusted quickly and safely, and the vibration-damped MVT handle contributes to better comfort during prolonged use.
Safety is prioritised with features such as overload protection, electronic soft start, restart protection and the Metabo S-automatic safety clutch, which reduces the risk of kickback. The robust construction and self-disconnecting motor brushes extend the machine's service life.
With a weight of 2.5 kg and a 4-metre cable, the WEV 15-125 Quick provides a good balance between power, control and freedom of movement, making it suitable for both precision work and heavier grinding tasks.
- Powerful motor: 1550 W high-performance motor for demanding tasks.
- Speed control: Adjustable rotation speed from 2,800 to 11,000 rpm.
- Quick system: Tool-free disc change for fast and efficient operation.
- Vibration damping: MVT handle reduces strain during prolonged use.
- Safety features: Overload protection, soft start and restart protection.
- Long service life: Robust construction and self-disconnecting motor brushes.
Pros and cons
- Powerful motor with high power reserve
- Fast and tool-free disc change
- Adjustable speed for different materials
- Good vibration damping and ergonomics
- Several safety features for safe operation
- The weight of 2.5 kg can feel heavy during prolonged use
- The cable may limit freedom of movement compared to cordless models
Pros and cons
Pros
- Powerful motor with high power reserve
- Fast and tool-free disc change
- Adjustable speed for different materials
- Good vibration damping and ergonomics
- Several safety features for safe operation
Cons
- The weight of 2.5 kg can feel heavy during prolonged use
- The cable may limit freedom of movement compared to cordless models
Pros
- Powerful motor with high power reserve
- Fast and tool-free disc change
- Adjustable speed for different materials
- Good vibration damping and ergonomics
- Several safety features for safe operation
Cons
- The weight of 2.5 kg can feel heavy during prolonged use
- The cable may limit freedom of movement compared to cordless models
Specifications
- Manufacturer: Metabo
- Model: WEV 15-125 Quick
- Item number (SKU): 600468000
- Disc diameter: 125 mm
- Rated power: 1550 W
- Output power: 940 W
- No-load speed: 2,800–11,000 rpm
- Speed at rated load: 11,000 rpm
- Torque: 3.5 Nm
- Spindle thread: M14
- Weight without power cable: 2.5 kg
- Cable length: 4 m
- Scope of delivery: Protective guard, support flange, Quick clamping nut, MVT handle
The Milwaukee Angle Grinder AG 800-125 EK is a compact and powerful 125 mm angle grinder powered by an 800 W motor. It is designed to deliver efficient cutting and grinding in metal and other hard materials while maintaining low weight and ergonomic design.
The machine has a slim grip and a total length of only 194 mm, making it easy to handle even in tight work areas. A flat gear housing provides better visibility of the workpiece and allows for optimal cutting depth.
Safety is prioritised with a no-voltage release switch that prevents automatic restart after a power outage, as well as soft start for better control. The guard can be adjusted and removed without tools, making it quick to adapt the machine to different tasks.
The angle grinder comes with a 4-metre cable, guard, side handle, flange, flange nut and key, so it is ready to use straight out of the box.
- Powerful motor: 800 W motor ensures efficient cutting and grinding.
- Compact design: Only 194 mm long and 2.0 kg for easy handling.
- Safety features: No-voltage release switch and soft start for increased control.
- Easy adjustment: The guard can be adjusted without tools.
- Flat gear housing: Provides better visibility and optimal cutting depth in tight areas.
Pros and cons
- Low weight and compact construction
- Efficient 800 W motor
- Ergonomic grip for comfortable use
- Safety features such as no-voltage release switch and soft start
- Easy adjustment of guard without tools
- Comes without case or bag
- No anti-vibration system or motor brake
Pros and cons
Pros
- Low weight and compact construction
- Efficient 800 W motor
- Ergonomic grip for comfortable use
- Safety features such as no-voltage release switch and soft start
- Easy adjustment of guard without tools
Cons
- Comes without case or bag
- No anti-vibration system or motor brake
Pros
- Low weight and compact construction
- Efficient 800 W motor
- Ergonomic grip for comfortable use
- Safety features such as no-voltage release switch and soft start
- Easy adjustment of guard without tools
Cons
- Comes without case or bag
- No anti-vibration system or motor brake
Specifications
- Model: AG 800-125 EK
- Manufacturer: Milwaukee
- Item number (SKU): 4933451213
- Power: 800 W
- Disc diameter: 125 mm
- Max. cutting depth: 33 mm
- No-load speed: 11,500 rpm
- Spindle thread: M14
- Weight: 2.0 kg
- Length: 194 mm
- Switch: Lockable slide switch
- Anti-kickback protection: No
- AVS (Anti-vibration system): No
- Motor brake: No
- No-voltage release switch: Yes
- Supplied in: Without case or bag
- Standard equipment: Guard, side handle, key, flange nut
- Cable: 4 metres
The Metabo Angle Grinder W 850-125 is designed as a universal machine for grinding and cutting metal, stone, and other hard materials. It is built with a focus on durability and reliability, making it suitable for both workshops and construction sites.
The machine is equipped with a powerful motor with good overload capacity, allowing it to handle demanding tasks without losing performance. The twist-proof guard contributes to increased safety during use, and the restart protection prevents accidental start-up after a power outage.
With a disc diameter of 125 mm and an output of 850 watts, the model offers a good balance between power and manageability. The compact size makes it easy to control, even during long work sessions or in confined work areas.
- Power of 850 W: Provides sufficient power for most grinding and cutting tasks.
- 125 mm disc diameter: Fits standard grinding and cutting discs.
- Twist-proof guard: Increases safety during use.
- Restart protection: Prevents accidental start-up after a power outage.
- Compact design: Makes the machine easy to handle and transport.
Pros and cons
- Robust construction with good overload capacity
- Safety features such as restart protection and protective guard
- Compact and easy to handle
- Suitable for many types of tasks
- Delivered without extra accessories unless otherwise stated
- May require breaks during prolonged use to avoid overheating
Pros and cons
Pros
- Robust construction with good overload capacity
- Safety features such as restart protection and protective guard
- Compact and easy to handle
- Suitable for many types of tasks
Cons
- Delivered without extra accessories unless otherwise stated
- May require breaks during prolonged use to avoid overheating
Pros
- Robust construction with good overload capacity
- Safety features such as restart protection and protective guard
- Compact and easy to handle
- Suitable for many types of tasks
Cons
- Delivered without extra accessories unless otherwise stated
- May require breaks during prolonged use to avoid overheating
Specifications
- Manufacturer: Metabo
- Model: W 850-125
- Power: 850 W
- Disc diameter: 125 mm
- Safety features: Restart protection, twist-proof guard
- Application area: Grinding and cutting of metal, stone, etc.
- Item number: 603608000
Other products
The Metabo WPB 36-18 LTX BL 24-230 Quick Solo I MB is a large and efficient cordless angle grinder designed for demanding cutting and grinding tasks. With a disc diameter of 230 mm and a maximum cutting depth of 77 mm, it can handle both rough processing and precision work.
The machine is powered by two 18 V batteries, which together provide efficient 36 V operation. The brushless Metabo motor is encapsulated for optimal dust protection, contributing to long service life and high efficiency under load.
Safety is prioritised with a dead man's switch that stops the machine when the grip is released, as well as a quick braking system that stops the disc within a few seconds. The electronic safety shutdown reduces the risk of kickback if the disc jams.
The Metabo Quick system allows for tool-free disc changes, and the protective cover can be adjusted without twisting. The main handle can be rotated for better ergonomics, and the vibration-damped MVT auxiliary handle can be mounted in three positions for optimal control.
The angle grinder is compatible with Metabo's LiHD batteries, which provide long runtime and can be used with all 18 V batteries and chargers in the Metabo system.
- Powerful operation: 36 V system based on two 18 V batteries provides high performance without a cord.
- Large cutting depth: 230 mm disc and 77 mm maximum cutting depth for demanding tasks.
- Safety features: Dead man's switch, quick braking, and electronic safety shutdown.
- Tool-free disc change: Metabo Quick system for fast and easy replacement.
- Ergonomic design: Rotatable handle and vibration-damped auxiliary handle for better comfort.
Pros and cons
- High performance with 36 V operation via two 18 V batteries
- Brushless motor with effective dust protection
- Multiple safety features for user protection
- Tool-free disc change and adjustable protective cover
- Compatible with Metabo 18 V battery system
- Relatively high weight compared to smaller angle grinders
- Requires two batteries for full operating power
Pros and cons
Pros
- High performance with 36 V operation via two 18 V batteries
- Brushless motor with effective dust protection
- Multiple safety features for user protection
- Tool-free disc change and adjustable protective cover
- Compatible with Metabo 18 V battery system
Cons
- Relatively high weight compared to smaller angle grinders
- Requires two batteries for full operating power
Pros
- High performance with 36 V operation via two 18 V batteries
- Brushless motor with effective dust protection
- Multiple safety features for user protection
- Tool-free disc change and adjustable protective cover
- Compatible with Metabo 18 V battery system
Cons
- Relatively high weight compared to smaller angle grinders
- Requires two batteries for full operating power
Specifications
- Battery voltage: 18 V (2 x 18 V = 36 V operation)
- Disc diameter: 230 mm
- Maximum cutting depth: 77 mm
- No-load speed: 6600/min
- Spindle thread: M14
- Grip circumference: 140 mm
- Weight without battery: 4.6 kg
- Weight with battery: 6.5 kg
- Item number (SKU): 613103840
The Metabo WE 2000-230 is a powerful angle grinder with a rated input power of 2000 watts and a disc diameter of 230 mm. It is designed to handle larger grinding and cutting tasks that require high performance and reliability.
The machine is equipped with a current limiter and soft start, which reduces the load on the power grid and prevents the fuse from tripping at startup. The built-in Metabo safety switch prevents accidental start-up, increasing safety during use.
An auxiliary handle can be mounted in three different positions, allowing the user to adjust the grip according to the task. The delivery scope includes a protective guard, support flange, two-hole nut, auxiliary handle, and pin spanner.
With a weight of 5.2 kg (without power cable) and a cable length of 4 metres, the WE 2000-230 offers a good balance between power and handling. It is suitable for both metalworking and other demanding materials.
- Powerful motor: 2000 W rated power and 1370 W output power provide high performance.
- Soft start and current limiter: Prevents overloading of fuses at startup.
- Safety switch: Protects against accidental start-up.
- Ergonomic design: The auxiliary handle can be mounted in three positions for better control.
- Comprehensive delivery scope: Includes protective guard, support flange, two-hole nut, auxiliary handle, and pin spanner.
Pros and cons
- High power and robust construction
- Soft start and safety switch increase safety
- Flexible handling with three handle positions
- Suitable for large disc tasks (230 mm)
- Relatively high weight can cause fatigue during prolonged use
- Requires two hands and experience for safe operation
Pros and cons
Pros
- High power and robust construction
- Soft start and safety switch increase safety
- Flexible handling with three handle positions
- Suitable for large disc tasks (230 mm)
Cons
- Relatively high weight can cause fatigue during prolonged use
- Requires two hands and experience for safe operation
Pros
- High power and robust construction
- Soft start and safety switch increase safety
- Flexible handling with three handle positions
- Suitable for large disc tasks (230 mm)
Cons
- Relatively high weight can cause fatigue during prolonged use
- Requires two hands and experience for safe operation
Specifications
- Model: WE 2000-230
- Manufacturer: Metabo
- Disc diameter: 230 mm
- Rated input power: 2000 W
- Output power: 1370 W
- No-load speed: 6600 /min
- Speed at rated load: 4500 /min
- Torque: 13 Nm
- Spindle thread: M14
- Weight without power cable: 5.2 kg
- Cable length: 4 m
- Vibration (surface grinding): 6.5 m/s² (K = 1.5 m/s²)
- Vibration (sanding with sanding sheet): 2.5 m/s² (K = 1.5 m/s²)
- Sound pressure level: 90 dB(A)
- Sound power level (LwA): 101 dB(A)
- Measurement uncertainty K: 3 dB(A)
- Article number: 606432000
The Metabo DW 10-125 Quick Angle Grinder is designed for grinding both flat and curved surfaces on many types of materials. It is built with a lightweight and impact-resistant plastic housing, which is also cold-insulated to increase comfort during prolonged use.
The machine is equipped with a Metabo VibraTech (MVT) auxiliary handle that reduces vibrations and thus minimises strain on the user. The Quick system allows discs to be changed quickly and without tools, saving time in daily work.
The protective guard can be adjusted in eight positions without tools, and the air outlet is sound-damped to reduce noise levels. The user-friendly exhaust of return air through the handle prevents dust from swirling up in the work area.
The safety switch prevents accidental start-up, and the machine is intended for use with grinding and cutting discs with a diameter of 125 mm. The combination of ergonomics, safety, and efficiency makes it suitable for professional users working with metal, stone, or other hard materials.
- Ergonomic design: Lightweight and cold-insulated housing made of impact-resistant plastic for comfortable use.
- Vibration damping: MVT handle reduces vibrations and strain during work.
- Quick system: Tool-free disc change via quick-release nut.
- Adjustable protective guard: Can be set in eight positions without tools.
- Sound-damped air outlet: Reduces noise and improves the working environment.
- Safety switch: Prevents accidental start of the machine.
Pros and cons
- High performance for demanding grinding tasks
- Ergonomic and vibration-damped design
- Quick disc change without tools
- Adjustable protective guard for flexible use
- Sound-damped air outlet for lower noise levels
- Requires compressed air supply for operation
- May be less suitable for small hobby tasks compared to electric models
Pros and cons
Pros
- High performance for demanding grinding tasks
- Ergonomic and vibration-damped design
- Quick disc change without tools
- Adjustable protective guard for flexible use
- Sound-damped air outlet for lower noise levels
Cons
- Requires compressed air supply for operation
- May be less suitable for small hobby tasks compared to electric models
Pros
- High performance for demanding grinding tasks
- Ergonomic and vibration-damped design
- Quick disc change without tools
- Adjustable protective guard for flexible use
- Sound-damped air outlet for lower noise levels
Cons
- Requires compressed air supply for operation
- May be less suitable for small hobby tasks compared to electric models
Specifications
- Manufacturer: Metabo
- Model: DW 10-125 Quick
- Article number (SKU): 601591000
- Disc diameter: 125 mm
- Handle: Metabo VibraTech (MVT) vibration-damped auxiliary handle
- Disc change: Metabo Quick quick-release nut (tool-free)
- Protective guard: Adjustable in 8 positions without tools
- Housing: Impact-resistant, cold-insulated plastic
- Air outlet: Sound-damped and rear-directed through the handle
- Safety: Safety switch against accidental start
- Use: For grinding and cutting discs Ø 125 mm
The Metabo WEV17-125 Quick is a 125 mm angle grinder with a powerful 1700 W Marathon motor that delivers high performance and long service life. The motor is designed to provide up to 50% more torque and better overload capacity compared to previous models.
The machine features Vario-Tacho-Constamatic (VTC) electronics, allowing the speed to be adjusted between 2,800 and 11,000 revolutions per minute, so it can be adapted to different materials and tasks. The constant electronics ensure that the speed remains stable under load.
The Quick system allows for tool-free disc changes, and the rotating guard can be adjusted without a key. The gear housing can also be rotated in 90° steps, allowing the angle grinder to be adapted for both right- and left-handed users.
To increase comfort during longer work sessions, the machine is equipped with a vibration-damping Metabo VibraTech (MVT) handle. Safety is supported by a mechanical S-automatic clutch that reduces the risk of kickback, as well as electronic overload protection, soft start, and restart protection.
- 1700 W Marathon motor: High performance and long service life with improved torque.
- Variable speed: Adjustable between 2,800 and 11,000 rpm for optimal control.
- Quick system: Tool-free disc change.
- Vibration damping: MVT handle reduces strain during extended use.
- Safety features: S-automatic clutch, soft start, and restart protection.
- Rotatable guard: Can be adjusted without tools for flexible use.
Pros and cons
- Powerful motor with high overload capacity
- Adjustable speed for different materials
- Tool-free disc change via the Quick system
- Low vibration level with MVT handle
- Multiple safety features for increased user protection
- The weight of 2.5 kg may feel heavy during extended use
- The high power requires good control and experience for precision work
Pros and cons
Pros
- Powerful motor with high overload capacity
- Adjustable speed for different materials
- Tool-free disc change via the Quick system
- Low vibration level with MVT handle
- Multiple safety features for increased user protection
Cons
- The weight of 2.5 kg may feel heavy during extended use
- The high power requires good control and experience for precision work
Pros
- Powerful motor with high overload capacity
- Adjustable speed for different materials
- Tool-free disc change via the Quick system
- Low vibration level with MVT handle
- Multiple safety features for increased user protection
Cons
- The weight of 2.5 kg may feel heavy during extended use
- The high power requires good control and experience for precision work
Specifications
- Power (nominal input): 1700 W
- Output power: 1040 W
- No-load speed: 2800–11000 rpm
- Speed under load: 11000 rpm
- Torque: 3.7 Nm
- Spindle thread: M14
- Disc diameter: 125 mm
- Weight: 2.5 kg
- Electronics: VTC constant speed, soft start, restart protection
- Safety: S-automatic clutch, electronic overload protection
- Scope of delivery: Guard, support flange, M-Quick clamping nut, MVT handle
Different types of angle grinders
There are several types of angle grinders, each with its strengths depending on the type of task and work environment.
1. Compact angle grinders
These models are small and lightweight, usually with discs of 115–125 mm. They are ideal for precision work, grinding welds and deburring metal. Compact models are popular among both DIY enthusiasts and professionals who need flexibility.
2. Large angle grinders
Large models with 230 mm discs are used for heavier tasks such as cutting concrete, stone and thick metal. They often require two hands and have more powerful motors, making them suitable for construction sites and larger projects.
3. Battery-powered angle grinders
These models provide the freedom to work without a cord and are ideal in places without access to electricity. The latest battery technologies offer high power and long runtime, but they can be slightly heavier than corded models.
4. Pneumatic angle grinders
Pneumatic (air-powered) angle grinders are often used in industry where compressed air is available. They are lightweight but require a compressor and are therefore less common in private workshops.
Different brands of angle grinders
The market for angle grinders is broad, and several manufacturers specialise in different segments.
Bosch
Bosch offers a wide range of both hobby and professional tools. Their angle grinders are known for high quality, user-friendliness and innovative safety features. The range includes everything from compact battery models to powerful industrial machines.
Makita
Makita is a popular choice among professionals. The brand is known for reliable machines with good balance and ergonomics. Their battery series is compatible with many different types of tools, making them practical for those who already own Makita products.
DeWalt
DeWalt focuses on robustness and performance. Their angle grinders are often equipped with advanced safety features and powerful motors that can handle even demanding tasks. They are a good choice for professional use.
Milwaukee
Milwaukee has a strong reputation for innovation and durability. Their M18 series of battery-powered angle grinders are among the most powerful on the market and appeal to both professionals and serious DIY users.
Metabo
Metabo is known for delivering tools with a focus on safety and long service life. Their angle grinders often feature automatic safety shut-off and vibration damping, making them comfortable to work with for longer periods.
Frequently asked questions
What is an angle grinder used for?
An angle grinder can be used for cutting, grinding, deburring and polishing materials such as metal, stone, concrete and tiles. With the right accessories, it can also be used for rust removal and surface treatment.
What size angle grinder should I choose?
For lighter tasks and precision work, a 115–125 mm model is often sufficient. For larger and heavier tasks, such as cutting concrete, a 230 mm model with higher power is recommended.
Can I use the same discs for all materials?
No, discs are designed for specific materials. Use metal discs for metal, diamond discs for stone and concrete, and flap discs for grinding. Using the wrong disc can be dangerous and produce poor results.
How do I maintain my angle grinder?
Clean the tool regularly from dust, check cables and connectors, and replace worn discs. Lubricate moving parts when necessary and store the machine in a dry place to extend its lifespan.
Is a battery-powered angle grinder as powerful as a corded one?
The latest battery-powered models can deliver almost the same performance as corded models, especially for light and medium tasks. For continuous, heavy work, however, a corded model may still be more efficient.
Læs også:
